Turbo XS Standard Boost controller Boost Controllers (SBC)
Back to previous page >POTN Price:
£44.03 inc VAT
Delivery Charge:
£7.50 inc VAT
Delivery Time:
5-6 days
depending on stock availability
Customer Rating:
Standard Boost Controller
Simple, effective boost control
Adjustable bleed valve
Boost up to 12psi over stock!
Adjusting screw increases boost
Possibly the most effective way to generate more power from your turbocharged vehicle is to simply increase the boost pressure. This can be achieved quickly and very cost effectively with the TurboXS Standard Boost Controller.
The TurboXS Standard Boost Controller is installed in line with the pressure hose running from the positive pressure side of the turbo to the wastegate actuator system.
It can be used on vehicles with internal and external waste gate systems and on vehicles fitted with factory electronic boost control systems. Ouick and easy to install
Cut the wastegate pressure hose and insert the supply pressure hose onto the silver colored nipple of the boost controller. Insert the wastegate supply hose onto the blue colored nipple. Secure the hoses with hose clamps. Alternatively, use the hose extension which eliminates the need to cut the pre-existing pressure hose. The Boost Controller can be mounted with the mounting bracket. Simple Accurate Adjustment
The boost pressure is adjusted via the adjusting screw located internally on the top of the TurboXS Boost Controller. The vehicles boost pressure can be increased by winding the adjusting screw in the counter-clockwise direction. Once the boost pressure has been increased, winding the adjusting screw in the clockwise direction will decrease the boost pressure. Typically, one (1) full turn of the adjusting screw in the counter-clockwise direction will result in a turbo boost increase of one psi.
Possibly the most effective way to generate more power from your turbocharged vehicle is to simply increase the boost pressure. This can be achieved quickly and very cost effectively with the TurboXS Standard Boost Controller.
The TurboXS Standard Boost Controller is installed in line with the pressure hose running from the positive pressure side of the turbo to the wastegate actuator system.
It can be used on vehicles with internal and external waste gate systems and on vehicles fitted with factory electronic boost control systems. Ouick and easy to install
Cut the wastegate pressure hose and insert the supply pressure hose onto the silver colored nipple of the boost controller. Insert the wastegate supply hose onto the blue colored nipple. Secure the hoses with hose clamps. Alternatively, use the hose extension which eliminates the need to cut the pre-existing pressure hose. The Boost Controller can be mounted with the mounting bracket. Simple Accurate Adjustment
The boost pressure is adjusted via the adjusting screw located internally on the top of the TurboXS Boost Controller. The vehicles boost pressure can be increased by winding the adjusting screw in the counter-clockwise direction. Once the boost pressure has been increased, winding the adjusting screw in the clockwise direction will decrease the boost pressure. Typically, one (1) full turn of the adjusting screw in the counter-clockwise direction will result in a turbo boost increase of one psi.
