Dynotune Wet Nitrous Kit (without bottle)
Back to previous page >POTN Price:
£265.22 inc VAT
Delivery Charge:
£12.50 inc VAT
Delivery Time:
3-5 days
depending on stock availability
Customer Rating:
Universal wet nitrous oxide base kit
At POTN.com we have put this together for our customers who want to fit the quality, proven, Dynotune dry nitrous kit to their own nitrous oxide bottle. Our base nitrous kits come with everything you need to build a dry nitrous system except the nitrous bottle and bottle brackets.
hoose between a CGA660 or a BS341 No.8 bottle nut. The CGA660 fits most American DOT marked nitrous bottles such as Dynotune, NOS, NX (Nitrous Express) and Ny-Trex. The BS8 bottles nuts have been specially developed by Turbobits and are designed for our own line of Euro PI marked nitrous oxide bottles.
150HP increase
This system will work on all petrol cars (carb or EFi) and comes complete with all the parts and instructions needed to install onto your existing nitrous bottle, with CGA660 or BS NO.8 valve. The nitrous kit is good for up to an additional 150 HP increase!
The Wet Nitrous Kit includes:
4AN stainless CGA660 or BS8 bottle nut & teflon washer
16 foot braided stainless nitrous line, blue fittings
High flow nitrous and fuel solenoids
Solenoid mounting bracket
2 foot braided stainless nitrous and fuel feed lines, red and blue fittings
Braided stainless line for fuel rail test port installation, red fitting
Jets for 35, 50 and 75HP
High flow fogger nozzle Chrome
Fogger nozzle mounting adaptor so the nozzle does
not blow out during injection causing a fire, makes
mounting the fogger nozzle in plastic or rubber a snap!
Fogger nozzle tap for threading the hole
5/16 inch fuel injection hose with clamps and brass
Tee, all fittings and clamps for a complete
installation
Lighted arming switch, relay, wire and wire
harness, fuse, crimp terminals etc..
Micro throttle activation switch and mounting
bracket
Our 22 page nitrous installation and tuning Book is
included! Full pictures and detailed installation
instructions for all the fuel injection applications.
Stainless Steel Components
This universal nitrous wet kit is the most complete nitrous kit available all the way down to the tap for the fogger nozzle. Quality stainless steel components are standard on all Dynotune nitrous kits, not plastic or brass.
Safe
This Dynotune nitrous kit is tuned for safe reliable horsepower increase. More and more folks are switching to Dynotune products due to the price, performance, innovation and support you will get with no other manufacturer.
A Brief Description of Fitting
Firstly you need to drill and fit the nozzle into the intake pipe just before the Throttle body. You then run two hoses from this nozzle, one for the fuel and one for the Nitrous, these hoses then connect to a solenoid each, an electronic valve which releases the mixture.
The fuel solenoid is connected to the cars fuel system by another hose. An extra long hose connects the Nitrous solenoid to the nitrous bottle fixed up in the cars boot.
The last stage is to connect a wire between both solenoids and a switch which fits under the accelerator pedal. This switch is activated when the pedal is flat on the floor, opening the solenoid valves and release the Nitrous/Fuel mixture.
For a more detailed discription of fitting click here to download the full instructions
Please note, all nitrous parts are non returnable unless faulty. If you have a hatchback you may need to fit a safety valve (available separatley)
At POTN.com we have put this together for our customers who want to fit the quality, proven, Dynotune dry nitrous kit to their own nitrous oxide bottle. Our base nitrous kits come with everything you need to build a dry nitrous system except the nitrous bottle and bottle brackets.
hoose between a CGA660 or a BS341 No.8 bottle nut. The CGA660 fits most American DOT marked nitrous bottles such as Dynotune, NOS, NX (Nitrous Express) and Ny-Trex. The BS8 bottles nuts have been specially developed by Turbobits and are designed for our own line of Euro PI marked nitrous oxide bottles.
150HP increase
This system will work on all petrol cars (carb or EFi) and comes complete with all the parts and instructions needed to install onto your existing nitrous bottle, with CGA660 or BS NO.8 valve. The nitrous kit is good for up to an additional 150 HP increase!
The Wet Nitrous Kit includes:
Stainless Steel Components
This universal nitrous wet kit is the most complete nitrous kit available all the way down to the tap for the fogger nozzle. Quality stainless steel components are standard on all Dynotune nitrous kits, not plastic or brass.
Safe
This Dynotune nitrous kit is tuned for safe reliable horsepower increase. More and more folks are switching to Dynotune products due to the price, performance, innovation and support you will get with no other manufacturer.
A Brief Description of Fitting
Firstly you need to drill and fit the nozzle into the intake pipe just before the Throttle body. You then run two hoses from this nozzle, one for the fuel and one for the Nitrous, these hoses then connect to a solenoid each, an electronic valve which releases the mixture.
The fuel solenoid is connected to the cars fuel system by another hose. An extra long hose connects the Nitrous solenoid to the nitrous bottle fixed up in the cars boot.
The last stage is to connect a wire between both solenoids and a switch which fits under the accelerator pedal. This switch is activated when the pedal is flat on the floor, opening the solenoid valves and release the Nitrous/Fuel mixture.
For a more detailed discription of fitting click here to download the full instructions
Please note, all nitrous parts are non returnable unless faulty. If you have a hatchback you may need to fit a safety valve (available separatley)
